Galaga Fighter ship earrings. Photo by Monica Jones
We’re selling finished earrings in our store, but if you have access to a laser cutter, you can make your own with our free downloadable .svg file (see materials below).
Materials
Galaga ship .svg file
1/8-inch-thick white acrylic sheet sized for your laser cutter
Fine-tipped paint pens in blue and red
Gloss varnish
Jewelry findings (fish hooks and jump rings)
Jewelry pliers
Painter’s tape
Tips
The .svg file is separated into three layers. Cut the outermost layer and score the other two.
If your acrylic doesn’t come masked, cover the front and back with painter’s tape or masking tape to prevent scorch marks. When your cut is complete, remove just the areas you want to paint. The tape will work as a stencil to make your job easier.
I use white acrylic sheets because they’re easy and sturdy, but use any laser-safe material you prefer. Stick with acrylic if you decide to make the earrings thinner than 1/8 inch.
Varnish the earrings once the paint is completely dry. I prefer leaving the tape on while applying the varnish because the acrylic is already as glossy as it’s going to get, but it’s up to you.
If you’ve never made earrings before, check out this video on how to attach the jump ring and fish hook to the base.
This design is available for personal use.
Masterwork Tools is an Amazon Associate and earns a small commission from qualifying purchases.